High Temperature k-type Thermocouple Sensor for Ceramic Kiln Furnace CR-1

K-Type Thermocouple CR-01 for Digital Kiln Thermometer

- 1 thermocouple with high temperature ceramic tube insulation -

-58 to 2498 °F    (-50 to 1370 °C)

This is a heavy duty K-type Thermocouple for use in kiln and furnace applications. The probe is made from AWG 8 Gauge thermocouple wire and is rated for continuous use at very high temperatures up to 2500 °F Fahrenheit or 1370 °C Celsius. The k-type thermocouple is about 8.5 inch in total length, and the 6 insulation tubes are about 6.5 inch long. It will work with any K-type termometer or pyrometer, or temperature controller for kilns and oven that can accept a type K signal.

This type K Thermocouple Kiln Probe is made with 6 ceramic insulators, each about 1 inch long, and it allows you to adjust the probe length by removing insulator elements and shortening the wire to your exact requirement.

This k-type thermocouple is frequently used in ceramic ovens, kilns and furnaces, in pottery ovens, metal working, manufacturing and whenever you need to measure and control very high temperatures. It can serve as replacement K-type thermocouple for your existing pyrometer probe. It will work with electrical, wood and propane gas fired kilns and forges.

Specifications:

• K-type Thermocouple

• Measurement Range -58 to 2498 °F (-50 to 1370 °C)

• Wire Diameter: AWG 8, 0.13” or 3.2 mm

• Total length: 8.5 inch (21.5 cm)

• Insulated length: 6.5 inch (16.2 cm)

• Ceramic Insulator, oval shape: L~ 0.5” W~ 0.4” (L=12.3mm W=10mm)