Set of 2 K-Type Thermocouple for Digital Thermometers PK-401

Set of 2 K-Type Thermocouple for Digital Thermometers  PK-401 5ft

-320 to 752°F    (-200 to 400°C)

This is a set of 2 reliable thermocouple probes with a K-Type sensor. The sensor is at the tip of a 5 ft (150 cm) long wire probe, which has a medium temperature fiberglass insulation, good up to 752 degree Fahrenheit. The fiberglass is secured with a PE plastic heat shrink tube at the tip.

It has a miniature type thermocouple connector (2 flat blades) that will work with digital K-type thermometers of many manufacturers. This probe can used to measure air or gas temperatures, non corrosive liquids and it can be attached to pipes or embedded into objects you want to measure.

This thermocouple will read very low temperatures, if you have a suitable thermometer. I have tested this down to -350°F (-210°C) with my thermometer DT1311 and DT1312.

Specification:

Thermocouple: K-Type ( chromel / alumel )
Temperature Range: -320 to 753°F     (-200 to 400°C)
Wire length: approx. 5 ft / 150 cm
Probe Diameter: 0.06 inch (1.6mm)
Miniature K-Type connector, can be opened if you want to shorten wire
Made in USA